AC Infinity 4x4 LED Grow Light - IONFRAME EVO6 - 500W
Product details
| Management number | 250625570 | Release Date | 2026/09/17 | List Price | US$173.70 | Model Number | 250625570 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Light a full 4x4 flowering canopy evenly on a 500W draw, and keep the driver heat out of the tent.
The AC Infinity IONFRAME EVO6 spreads genuine Samsung LM301H EVO diodes across a bar-style frame, so light reaches the corners of a 4x4 instead of blasting the center and fading at the edges. It pulls just 500W and 5.0A, so it runs on an ordinary household circuit, and the driver detaches to mount outside the tent. Built for the most common tent size, with even coverage, an easy power draw, and real schedule control.
- Light piles into the middle, leaving the corners of a 4x4 dim and stretchy
- Driver is fixed to the fixture, adding its heat to a small tent
- Older LM301B or Bridgelux 3030 diodes need more watts for the same light
- Runs off a wall timer with no ramping and no brightness steps
- Every added light needs its own plug and timer
- Plastic housing that isn't sealed for a humid grow tent
- Diodes spread across bars so a 4x4 lights evenly corner to corner
- Removable driver mounts outside so its heat stays out of the tent
- Samsung LM301H EVO diodes rated at 3.14 umol/J, the current efficiency tier
- Schedule controller with 10 intensity levels and sunrise/sunset ramping
- Daisy-chain up to 80 fixtures on one controller if you expand
- Steel and aluminum chassis, IP-65 rated for humid tents
How the EVO6 covers a full 4x4 evenly
A single-board light pushes most of its output through one dense block in the center of the fixture. The plants directly beneath it get plenty, but toward the edges of a 4x4 the intensity drops off, which is why corner plants stretch and finish lighter. The EVO6 fixes that with layout: the 1680 diodes sit across multiple thin bars that span a 32 by 32 inch frame, algorithmically spaced so light is distributed instead of stacked. Corner plants end up seeing close to what the center plants see, so the whole tent grows and finishes more evenly.
The full-spectrum mix handles the rest. 1074 EVO 3000K and 540 EVO 5000K white diodes carry the core photosynthetic spectrum, 54 OSRAM 660nm red diodes push the flowering response, and small counts of 395nm UV and 730nm far-red fill in the edges of the range. Because these are Samsung's LM301H EVO generation at 3.14 umol/J per diode, you get that coverage on a 500W draw rather than a bigger power bill.
1680 genuine Samsung LM301H EVO diodes 1680 diodes
EVO is Samsung's current horticulture diode generation, running a higher blue spectrum and more output per diode than LM301H, LM301B, or Bridgelux 3030 chips. Every diode on the board is genuine Samsung, not a re-labeled equivalent.
Detachable driver you can mount off-fixture Remote-mount driver
The driver unclips from the frame and mounts remotely, so you can put its heat outside the tent instead of adding it to a small sealed space. The driver body is compact at 7.16 by 1.57 inches, so it tucks out of the way.
Bar layout sized to a 4x4 footprint
The 32 by 32 inch frame carries diodes across its full width, so the light pattern fills a 4x4 tent rather than hot-spotting in the middle. Corner plants get usable light, not just spill.
Included schedule controller, no wall timer needed
The controller in the box runs a full daily on/off cycle, 10 brightness levels, and a sunrise/sunset setting that ramps the light up and down gradually. That's enough to run the light with nothing else to buy.
UIS platform ready for WiFi and app control
Plug it into a CONTROLLER 69 PRO or CONTROLLER AI+ (sold separately) to add phone app control, remote programming, automation, and custom grow recipes, and to link the light with AC Infinity fans and climate gear on one system.
Daisy-chains up to 80 lights on one schedule
Link fixtures in a line with UIS splitter dongles (sold separately) and run up to 80 lights from a single controller. One schedule change updates every light in the chain at once.
Setting up the EVO6 in your 4x4
Hang the fixture
Center the 32 by 32 inch frame over your 4x4 using the included rope hangers, or use the magnetic mounts on a steel frame. Leave headroom to raise and lower it.
Detach and place the driver
Unclip the driver and mount it outside the tent if you're running a sealed or heat-sensitive space. In an open room you can leave it on the frame.
Set your schedule
Plug in the schedule controller, set your on and off times, and pick a brightness level. Turn on sunrise/sunset if you want the light to ramp instead of snap on.
Dial in hang height
Growers typically hang the EVO6 about 18 to 24 inches above the canopy in bloom, then bring intensity up as stretch finishes. Start lower and raise as plants respond.
- IONFRAME EVO6 fixture, 500W across 1680 Samsung LM301H EVO diodes
- Detachable LED driver for off-fixture mounting
- UIS schedule controller with 10 levels and sunrise/sunset
- Ratchet rope clip hangers
- US power cord (NEMA 1-15 Type-A)
- Product manual and mounting hardware
- CONTROLLER 69 PRO / AI+ for WiFi, app, and automation
- UIS splitter dongles to daisy-chain multiple lights
- CLOUDLAB 844 Advance Grow Tent for a matched 4x4 footprint
- Running a 5x5? The 730W EVO8 is the sibling sized for that footprint
Questions? We're easy to reach.
Happy Hydro has been serving growers since 2006. Call or email us before you order, after you order, or any time something comes up. When you're happy, we're happy.
Bestseller ranking
Grow Lights
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form