AutoPot Tray2Grow with Grassroots Bed Living Soil System w/ Trellis Fittings
Product details
| Management number | 250626160 | Release Date | 2026/09/17 | List Price | US$78.73 | Model Number | 250626160 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
One living soil bed, built to fit your Tray2Grow tray. Watered automatically, zero electricity.
This kit pairs the AutoPot Tray2Grow tray with a Grassroots Living Soil bed sized to drop directly into it, replacing a row of separate pots or grow bags with one continuous root zone. The AQUAvalve5 refills the tray only when it runs dry, and the bed's MoistureLock liner pulls that water down through the soil instead of out the sides. One bed. One valve. Zero daily watering.
- Hand water each pot or bag, or babysit a drip timer
- Each container dries and drains on its own, so pockets go dry unevenly
- Water runs out the container sides and off the bench
- Arrange and level every pot individually, run separate drip lines to each
- Dump and replace potting mix in every container each cycle
- Multi-pot drip setups usually need a pump or timer to stay even
- AQUAvalve5 refills the tray only when it runs dry
- One continuous bed means even moisture edge to edge
- MoistureLock liner pulls water down through the soil, not out the sides
- Drop the bed in and level the tray once with the included spirit levels
- Wash the fabric bed and reuse the same living soil for the next run
- Fully passive. Gravity and capillary action only, nothing to plug in
Built to match the Tray2Grow footprint DIRECT FIT
Grassroots engineered this bed to sit inside the Tray2Grow tray with room to spare for the valve and tubing, so you are not guessing at a fit or trimming anything down.
One root zone, not six
A single bed replaces a row of pots or bags, so roots share one soil mass instead of drying out at each container's edge.
MoistureLock liner keeps biology alive
A BPA-free waterproof liner covers the bed's upper walls and directs water down through the soil profile, with a breathable strip at the bottom for aeration.
AQUAvalve5 demand watering
Water only enters the tray when it runs dry, not on a timer, so the bed never sits in standing water and never dries out unexpectedly.
Reusable soil, true no-till
The fabric bed is machine washable and folds flat between cycles, and the liner keeps enough moisture in the soil to support the same biology run after run.
Optional trellis frame
Add 4-way and 3-way PVC corner fittings to build a trellis directly off the bed. You supply the 1-inch PVC pipe and cut it to your tent height.
Level the tray, drop in the bed, let gravity handle the rest
Level the tray
Set the Tray2Grow tray on a level bench, tent floor, or table using the three included spirit levels.
Drop in the Grassroots bed
Slide the bed into the tray. If you chose the trellis option, attach the PVC corner fittings and your own 1-inch PVC pipe now.
Fill and plant
Fill with your living soil mix, leaving 3 to 5 inches of headroom. For starting plants, dig a hole in the soil and fill the pocket with a seed-starting mix rather than seeding directly into the bed soil.
Connect water and walk away
Hook up your reservoir or one of the FlexiTank add-ons to the AQUAvalve5. It refills the tray only when it runs dry, feeding the bed from below.
- Tray2Grow tray and lid
- Grassroots living soil bed with MoistureLock liner
- AQUAvalve5
- 2x 3/8" grommets, 1x 1/4" overflow grommet
- 3x circular spirit levels
- 3.3 ft of 3/8" tubing
- Root control sheet
- Trellis fittings: No (basic) or Yes (4-way + 3-way PVC corners, pipe not included)
- Reservoir: None, 6.6-gal, 13-gal, 25-gal, or 60-gal FlexiTank
Questions? We're easy to reach.
Happy Hydro has been serving growers since 2006. Call or email us before you order, after you order, or any time something comes up. When you're happy, we're happy.
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form