| Management number | 250625747 | Release Date | 2026/09/17 | List Price | US$46.03 | Model Number | 250625747 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The AutoPot XXL is a gravity-fed, self-watering system built for large fabric pots. Each module uses an AQUAvalve5 to deliver water and nutrients only when the plant draws them down, so root zones cycle naturally between wet and dry without timers, pumps, or electricity. Systems scale from 1 to 100 pots off a single reservoir, and every tray accepts either 9-gallon or 13-gallon GeoPot G Lite fabric pots.
The valve opens when the tray is dry and closes when it fills to about 1 inch of depth. Each pot gets its own valve, so individual plants draw at their own pace without recirculation or waste.
Each XXL tray accepts either a 9-gal or 13-gal GeoPot G Lite fabric pot. Both pot sizes share the same diameter, so they fit the same tray with no adapter needed.
Porous sidewalls stop root circling. Instead of spiraling around the pot edge, roots branch outward and create a denser feeding network than you would get in a solid plastic container of the same size.
The entire system runs on gravity. Raise the reservoir at least 6 inches above the highest AQUAvalve5, and water pressure does the rest. No power cords, no moving parts to maintain or replace.
Start with a 1-pot system and add XXL expansion modules whenever you need more capacity. Every module connects to your existing reservoir line with 3/8-inch or 1/2-inch pipe and cross connectors.
The AQUAvalve5 has a 66% larger inlet than the previous generation, reducing clogs with thicker nutrient solutions. For organics, AutoPot recommends running a small pump in the reservoir for 15 minutes every 2 hours to keep the solution mixed.
Place your FlexiTank or hard tank at least 6 inches above the highest tray. Attach the inline filter to the tank outlet, then run 3/8-inch or 1/2-inch pipe to your tray line.
Place each XXL tray on a level surface. Drop in the PotSock, then set the 9-gal or 13-gal fabric pot on top. The PotSock keeps roots from reaching the AQUAvalve5.
Pot up your plants and water them by hand from the top for the first week to 10 days. This lets roots establish before the bottom-fed system takes over.
Open the inline taps and fill the reservoir with water and nutrients. From here, the AQUAvalve5 handles everything. Refill the tank when it gets to about one-third full.
Questions? We're easy to reach.
Happy Hydro has been serving growers since 2006. Call or email us before you order, after you order, or any time something comes up. When you're happy, we're happy.
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form