AutoPot Easy2Go Vacation Watering Systems
Product details
| Management number | 250625698 | Release Date | 2026/09/17 | List Price | US$16.00 | Model Number | 250625698 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Leave for weeks and come home to healthy plants
The AutoPot Easy2Go kit turns any flat-based tray into a gravity-fed watering system using the patented AQUAvalve5. No electricity, no pumps, no timers. Connect it to a reservoir of 8 gallons or more, set your pots in the tray, and the valve meters water from below, refilling to a 1-inch depth only after your plants drink the previous fill dry. Works indoors, in greenhouses, on patios, and in grow tents. Assembles in under 10 minutes with a drill and a container you probably already own.
- Drip emitters and wicks deliver water on a fixed schedule, not when plants actually need it
- Timer systems need a power outlet, programming, and a pump that can fail while you're gone
- Hand watering means someone has to show up on schedule, every time, or plants suffer
- No dry-back cycle with constant drip, so roots stay wet between feedings
- A big plant and a small plant on the same line get identical water volumes
- More parts to set up and maintain: pump, timer, tubing, emitters, fittings
- AQUAvalve5 only opens when plants have consumed all available water, so watering matches demand
- Runs entirely on gravity from a raised reservoir. No pump, no electricity, no programming
- Set it once and leave. The valve keeps cycling as long as the reservoir has water
- Built-in wet/dry cycle: tray fills to 1 inch, plants drink it dry, valve reopens
- Every plant in the tray draws water from below based on its own root demand
- One valve, one pipe, two filters, one grommet. Assembles in minutes with a drill
AQUAvalve5 Plant-Led Watering No electricity
The valve fills your tray to a 1-inch depth and shuts off. It stays closed until your plants consume all the water, then reopens to refill. This creates a natural wet/dry cycle driven entirely by plant demand, not a clock.
5mm Large-Bore Inlet
The AQUAvalve5 has a 66% larger inlet than the previous AQUAvalve4. Faster fill rates, broader nutrient compatibility, and significantly less risk of blockage from organic or mineral feed solutions.
Link Multiple Kits Together
Each Easy2Go kit serves one tray. To cover more trays, connect additional kits to the same reservoir. Scale from a windowsill herb garden to a full greenhouse without changing the core system.
Works with Any Flat-Based Tray
No proprietary trays required. Any gardening tray with a flat bottom and a minimum depth of 1.2 inches will work. Use what you already have or pick up a standard nursery flood tray.
Use It Anywhere
Runs on gravity alone, so it works indoors, on patios, in greenhouses, in grow tents, or on a balcony. No outlet needed. No pump noise. No risk of failure during a power outage.
Included Spirit Level for Accurate Setup
The AQUAvalve needs a level surface to function correctly. The kit includes a circular spirit level so you can confirm your tray is flat before you leave, avoiding valve issues while you're away.
Setup in four steps
Prep your reservoir
Grab any container that holds at least 8 gallons. Drill a hole near the bottom, install the included top hat grommet and inline filter, and connect the 3/8-inch pipe. The reservoir must sit above the tray so gravity can do its job.
Level your tray
Place your flat-based tray (minimum 1.2 inches deep) on a stable surface. Use the included spirit level to confirm it's flat. The AQUAvalve relies on gravity and a level surface to open and close correctly.
Install the AQUAvalve5
Place the AQUAvalve5 in the tray and connect the pipe from your reservoir. Snap the AQUAvalve cover over the valve to protect it from getting bumped by pots. Run the pipe from the reservoir to the valve inlet.
Add plants and go
Set your potted plants in the tray (any growing medium works). Fill the reservoir with water or nutrient solution and open the tap. The valve fills the tray to 1 inch and stops. When plants drink it dry, it refills automatically.
- 1x AQUAvalve5
- 1x AQUAvalve5 cover
- 1x Circular spirit level
- 1x 1/2" to 3/8" inline filter
- 1x 3/8" golf filter
- 1x 3/8" top hat grommet
- 5 ft of 3/8" pipe
- Full printed instructions
- Reservoir: Any water container, 8+ gallon capacity
- Tray: Any flat-based gardening tray, 1.2"+ deep
- Drill: To install the grommet in your reservoir
Questions? We're easy to reach.
Happy Hydro has been serving growers since 2006. Call or email us before you order, after you order, or any time something comes up. When you're happy, we're happy.
Bestseller ranking
Drip
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form